component

MPO / MTP Connector

A multi-fiber push-on connector that terminates 12 or 24 fiber strands in a single ferrule.

What is MPO / MTP Connector?

MPO/MTP enables high-density fiber backbones (40G/100G/400G Ethernet). EIG PRO factory-terminates MPO trunks for fast, certified IDF-MDF installs. In a coordinated design, MPO / MTP Connector is selected by required performance, environment, pathway capacity, listed use, compatibility, and the project specification. Product names alone do not establish compliance: the complete channel, supports, terminations, grounding where applicable, and installation workmanship all affect the result. Submittals should identify the exact product and rating before procurement, while field installation should follow the approved details and manufacturer instructions. During closeout, the contractor should verify locations, labels, terminations, and test requirements, then record deviations on as-built documents. Owners should retain product data and results with the room, rack, port, or device schedule. This approach makes MPO / MTP Connector maintainable after turnover and prevents an undocumented component choice from becoming a future troubleshooting problem.

Frequently asked questions

Confirm the project specification, applicable codes and standards, approved products, pathway and power needs, testing, labeling, documentation, and responsibility for ongoing operation. Requirements vary by building, jurisdiction, and owner standard, so this article is a planning reference rather than a substitute for the contract documents.

Coordinate it during design and submittals, before pathways and finishes make changes expensive. Verify the installed condition again during testing and closeout, then include the result in the owner’s records.

Published references

Use the current project documents and adopted code. These links identify the standards owner, regulator, or manufacturer behind this article.

Where EIG PRO uses this

structured cabling

commercial

industrial

high rise

corporate campus

Related terms

Backbone Fiber

The fiber-optic runs that connect IDFs to the MDF and form the high-speed network spine of a building.

Fiber Optic Cable (OM3, OM4, OS2)

Glass-strand cable that carries data via light, used for backbones and long-distance runs.

Have a project that needs this?

EIG PRO designs and installs across Texas.